1 ptz function setup – AGI Security SYS-HC0451 HDCVI DVR User Manual User Manual
Page 72

HDCVI Standalone DVR User’s Manual
63
Pattern
Aux
Scan
Aux
on-off
button
Rotate
Go to menu
4.4.3.1 PTZ Function Setup
Click
, you can go to the following interface to set preset, tour, pattern, and scan. See
Figure 4-18
Preset Setup
In Figure 4-18, click preset button and use eight direction arrows to adjust camera to the
proper position. The interface is shown as in Figure 4-19.
Click Set button and then input preset number.
Click Set button to save current preset.
Figure 4-19
This manual is related to the following products: