3 1.5u series, 5u series – AGI Security SYS-HC0451 HDCVI DVR User Manual User Manual
Page 54

HDCVI Standalone DVR User’s Manual
45
3.2.3 1.5U series
This series DVR max has four SATA HDDs. Please use HDD of 7200rpm or higher.
1. Loosen the screws of the
upper cover.
2. Line up the HDD to the four
holes of the HDD bracket.
3. Use four screws to fix HDD.
4. Unfasten the HDD power
cable.
5.
Use the special data cable to
connect the HDD and the SATA
port
6. Insert the HDD power cable.
Close the chassis and fix the
screws to secure firmly.
4. Turn the device upside down
and then turn the screws in
firmly.
in the chassis.
5.
Fix the HDD firmly.
6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the
rear panel and the side panel.