AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 71)

HDCVI Standalone DVR User’s Manual
62
In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See
Figure 4-16. Please make sure your protocol supports this function and you need to use
mouse to control.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen
to adjust section size. The dragged zone supports 4X to 16X speeds. It can realize PTZ
automatically. The smaller zone you dragged, the higher the speed.
Figure 4-16
Name Function
key
function Shortcut
key
Function
key
function Shortcut
key
Zoom Near Far 
Focus Near │

Far ► │
Iris close   Open 
In Figure 4-15, click to open the menu, you can set preset, tour, pattern, scan and
etc. See Figure 4-17.
Figure 4-17
Please refer to the following sheet for detailed information.
Please note the above interface may vary due to different protocols. The button is grey
and can not be selected once the current function is null.
Right click mouse or click the ESC button at the front panel to go back to the Figure
4-15.
Icon Function Icon Function
Preset Flip
Tour Reset