Junger Audio D*AP8 Digital Audio Processor - Manual (Page 80)

D*AP8
78
#
The number of a network trigger.
Label Label of that network trigger. It will be used on the
Configuration pane and serves as a reference for 3
rd
party
software implementation (e.g. broadcast automation systems).
As an example you see the name of the first Trigger "Movie".
will remove a line from the list.
The name of the respective trigger may be selected via an EmBER+ enabled device to fire that
trigger. By means of a setup tool you must configure such network triggers in order to remote control
the D*AP8. You will find the Ember+ protocol details, the implementation guidelines as well as an
example here:
code.google.com/p/ember-plus/
Below is a screen shot of the EmBER+ viewer tool:
In the EmBER tree you go to:
"Device" > controller_dsp > network_trigger > parameters > e.g. "idx_1"
As a value you will receive the trigger name from the D*AP8.
In this example it is the trigger named: "Movie" – the 1
st
trigger
from the example above.