Junger Audio D*AP8 Digital Audio Processor - Manual (Page 23)

D*AP8
21
Important Note! The presets of the D*AP8 are persistent by nature. You are working directly on the preset
memory, i.e. you need not worry about storing such presets. The D*AP8 does it for you.
On the other hand you must be aware that you overwrite the actual preset settings! If you want to keep
original values (e.g. from a factory preset) you must simply copy the content of an existing one to the clip
board, add a new preset, name it differently and paste the clip board to it.
At the bottom of the PRESET part you find the soft buttons to the content of that preset to the
clip board or to the content of the clip board into an other preset which you have selected before
pasting.
You may also or the preset content to / from a file.
Setup GUI – SYSTEM – Remote Access – X*AP Remote
You will reach general functions and pre-settings of the EVENTS system via remote access from the X*AP
remote panel or from a mobile UI on a tablet, a smart phone or even via a separate browser session.
This function will be implemented with the next firmware release.
Setup GUI – SYSTEM – Remote Access – Mobile UI
For the moment there is no mobile UI implemented. This feature will be implemented soon.