Junger Audio D*AP8 Digital Audio Processor - Manual (Page 67)

D*AP8
65
Setup GUI – AUDIO PROCESSOR – Filter – Equalizer
The graphical EQ offers 5 bands. The characteristic of each band can be setup either left hand side of
the graph or alternatively for each band further below.
Program [Program1 / Program2 / Preset]
Selects the source for which the curve will be displayed.
This selection depends on the Voice Channel Mode
(see SYSTEM > Setup) and whether or not the channels are linked for
stereo operation.
Channel [1L/1R, 2L/2R, 1L, 1R, 2L, 2R]]
Depending on the program selected and the link status (see below
graph) the channel under control will be displayed here.
Enable [On / OFF]
Band 1 … 5 [OFF / Peak 1 / Peak 2 / Lo Shelf / Hi Shelf / Lo Cut / Hi Cut]
Filter characteristic will be selected by this pop-up :
Graph Permanently
[ON / OFF]
Visible The color code of the column headers in the lower display will change
depending on the selected program.
White color represents the actual selected program while brown
represents the LFE channel in the example above and pink represents
the second program.