Junger Audio D*AP8 Digital Audio Processor - Manual (Page 2)

DAP8-MEI_manual_EN_150713.doc
D*AP8
Hardware features
• D*AP8 1RU / 19" generic compact 8 channel processing unit
• X*AP RM 1 optional 1RU remote panel
• Dolby decoder optional built in Dolby D/D+/E decoder incl. metadata emulation
• Dolby encoder optional built in Dolby D/D+/AAC/HE-AAC or Dolby E encoder
• Dolby metadata I/O two 9-pin D-Sub connectors (RS485)
• 4x AES (BNC) I/O + SRC on board AES I/Os with relay bypass and (selectable) SRC per input
• Two interface slots expansion slots for optional I/O boards:
3-G/HD/SD-SDI, MADI, Dante, 4x AES I/O, 4Ch Analog I/O,
8 Ch Analog Out
• RJ45 network connector 100BaseT full duplex Ethernet interface
• USB connector built in USB < > serial adapter to access the service port
• 8x GPI/O balanced inputs and SSR contacts on a 25pin Sub-D
• Aux power supply isolated 5V supply for external GPI/O wiring
• External sync IN BNC input (Word Clock, AES, Black Burst, Tri-Level)
• Sync OUT BNC Word Clock output
Software features of D*AP8
•
TP limiter Junger Audio true peak limiter control algorithm
• LevelMagic II™ optional loudness management according to ITU BS.1770-1/-2/-3
EBU R128, ATSC A/85, ARIB TR-B32, Free TV OP-59,
Portaria 354
• Dynamic filter / EQ optional SPECTRAL SIGNATURE™ dynamic filter and
5 band parametric EQ
• Dynamics optional compressor, expander / gate
• Fail over Upmix optional automatic fail over / optional 5.1 Upmix
• Voice over optional 5.1 or stereo voice over from program input
• FM Conditioner optional MPX limiter and Pre-Emphasis limiter
• Dolby metadata emulation optional Dolby metadata emulation
• Dolby metadata generator generates RDD6 complied metadata
• Loudness measurement in reference to the respective standard
• SNMP agent SNMP v1, see D*AP8-MIB
• Remote control X*AP RM1 remote panel, l-s-b EmBER plus protocol and legacy GPI/Os
operating manual