Junger Audio D*AP8 Digital Audio Processor - Manual (Page 58)

D*AP8
56
Setup GUI – AUDIO PROCESSOR – Input
You may set the input conditions for both programs (Program 1 and 2) and the AUX path here:
Link (Program 1)
[Quad / Movie / Live / Linked / Linked & LFE]
You may select one of the possible multichannel modes to enable
gang setting of the parameter values
Link (Progarm 2) [Linked / Unlinked]
For stereo operation you may link the setup parameters
Similar applies fro the AUX path.
Input [Enable / Disable]
Enables or disables the input section
Mute [ON / OFF]
Input Gain (dB) [-80.0 … 0.0 … 20.0]
Mono [Stereo / L+R Mono / L/L Mono / R/R Mono]
Not applicable for multichannel program 1
Input HPF (Hz) [OFF / 20 / 40 / 80 / 120]
Input LPF (kHz) [OFF / 15 / 20 / 22]
Input Delay Coarse(ms) [0.0 … 2000.0]
Input Delay Fine (samples) [0 … 2000]