Junger Audio D*AP8 Digital Audio Processor - Manual (Page 14)

D*AP8
12
Below you see a display for page 2
of program 2:
Back to page 1/2:
The display is divided into columns above the function keys and horizontal lines representing
audio channels [LFE] or groups of channels [ALL = L/R/C/Ls/Rs].
Function key #1 selects one of the available lines and selects between [ALL] and [LFE].
If you want to change the Gain for the LFE you must press key #1 to select the second line.
If you press the Gain key #5 the second gain parameter in the Gain column will be highlighted and you can
change that gain by simply turning the rotary encoder:
Similar applies for all parameter setting via the X*AP RM
1:
1. Select the program [program 1]
2. select the page where the desired parameter is in [1/2]
2. select the channel / group of channels [LFE]
3. select the parameter [Gain]
4. set the parameter by the rotary encoder [3.5]
ON/OFF parameters can be changed either by pressing the rotary encoder or turning it
counter clockwise > off or clockwise > on.
MENU
ESC
Voice: Input Delay Coarse [ms] Fine [samples] HPF [Hz] LPF [kHz] 2/2
1/2 0.0 0
Program 2
OFF OFF L/R
MENU
ESC
Input Link On Mute Gain[dB] Mono 1/2
ALL Linked On off
Program 1
0.0
3.5 LFE On off LFE