Junger Audio D*AP8 Digital Audio Processor - Manual (Page 39)

D*AP8
37
Setup GUI – INTERFACES – Dante I/O Interface – Outputs
Outputs
The signals from the Dante
board to the network. They will
also appear in the device
ROUTING section.
Channel Numeric count of the channels.
Channel Up to 16 labels can be assigned
Label for each stream from the
interface to the network.
When you hover with the mouse
over the channel labels, you will
get a tool tip that that shows the
other (if any) labels assigned to
the same outputs assigned fro
multi layer routing.
Setup GUI – INTERFACES – Dante I/O Interface – Network
Dante Redundancy
The Dante interface allows redundant network operation.
Pls. refer to manufacturer's documentations of your Ethernet
equipment on supported redundant operation.