Doremi MCSHD - Manual (Page 75)

 Select 10b Precision (Same as the recording file)
To create the 3D file:
 Hold the OPTION key and press SAVE
 Press Enter to create the file.
13.2.6 Executing the Merge
After the 3D file is created.
 Locate to the desired time-code location. (By default the paste will be at 00:00:00:00.
 Go to OPTION MENU (08)
 Select Paste
 Press Enter
 The Merge process will start and the resulting 3D video will be pasted at the chosen
timecode location.
Note: make sure that you have enough disk space to accommodate the recordings and the
generated 3D file (Ex: if your Left-Eye and Right-Eye recordings are 1 hour long you will need to
have a free space on the drive sufficient for 30 minutes of recording at 220Mb/s).
After the merged 3D file is verified and plays properly in sync; you can delete the Single-video
recording file.
To delete the single-video recording file:
 Hold the OPTION key and press CLEAR.
 Use the JOG wheel to browse the file list.
 Press Enter to delete the file.
Example:
 The Left-Eye recording starts at 00:00:00:00 and ends at 00:10:20:25
 The Right-Eye recording starts at 01:00:00:00 and ends at 01:12:01:07
 The start of the needed Left-Eye starts at 00:01:02:03 and ends at 00:10:02:03 (total
duration is 9 minutes)
 A sync point on the Left-Eye is located at 00:05:02:03
 A sync point on the Right-Eye is located at 01:06:02:03
In this example the Merge function will use:
 The Left-Eye from 00:01:02:03 to 00:10:02:03.
 The Right-Eye from 01:02:02:03 to 01:11:02:03
 The duration of the 3D will be 9 minutes.
V_1.OM.000160.DRM Page 75 of 85 Version 5.2
Doremi Labs