Doremi MCSHD - Manual (Page 23)

5.2 Front Panel
The V1 front panel (called the RCV2) contains space for up to 3 Low Profile SCSI drives, keypad,
menu controls, transport controls, LCD display and an optional LCD video confidence monitor.
To disable the front panel and prevent accidental operation, hold the OPTION button then press
ESCAPE. Press again to unlock the RCV2. When the RCV2 is in “disable mode” the letters “DIS”
will be displayed in the top right corner of the LCD.
To reset the controller (soft reset) hold the 1, 2, 3 or 4 buttons and press CLEAR. This may be
necessary to reset the LCD video monitor if you switch between NTSC & PAL formats.
5.2.1 Keypad Area
Figure 17: Keypad Area
1, 2, 3, 4 (Channel Selection): If your V1 is in 1R/P mode, only channel "1" can be selected.
If it is in 1R-1P mode channels “1” and “2” can be selected.
AUD. SEL: Audio Select button: Switches between audio channel pairs for
the headphone connection.
ALPHA-NUMERIC KEYPAD: This keypad is used to enter numeric data such as time code
addresses, in and out points, locate points, etc. To enter data,
simply begin typing the numbers and the display will
automatically overwrite. To abort an operation, press the
ESCAPE button. The display will revert to its previous setting.
The BKSP (Backspace) button can be used to correct typing
errors. The keypad can also be used to name Video Segments
by using the corresponding letters (This Feature is not yet
available).
RECALL: Recall a saved video segment. For more about segments See
paragraph 6.4.
SAVE: Save a video segment into a memory location number or
name.
CLEAR: Clears the display to enter new data.
ENTER: Press after selecting a segment to play. Also to answer YES to
the V1’s “are you sure?” question.
OPTION + SAVE: Creates a new file.
V_1.OM.000160.DRM Page 23 of 85 Version 5.2
Doremi Labs