Doremi MCSHD - Manual (Page 48)

10 Option Menu
To call up the OPTION MENU Hold the OPTION and press the MENU (or down key ) buttons. Use  
the arrow keys to scroll through the menu selections.
Use the ++ or -- buttons to scroll through the sub-menus. The TOGGLE button sets the parameters
for the selected sub-menu. Press TOGGLE to increase or increment a value and hold OPTION and
TOGGLE to decrease or use the JOG wheel.
TOGGLE is also used to execute a command (OPTION MENU (5) and (6)), you will be prompted
“are you sure?” press ENTER for yes or ESC for no.
To enter time code numerals use the numeric keypad. To enter numbers for the IP, Time and Date
use the keypad and press the “.” button to skip from one section to the next (i.e. month to date).
Press ENTER to save your settings.
Commands that change the mode of operation, such as changing the IP, Subnet Mask, SCSI ID,
rec/play mode etc, will require you to reboot the V1. Please wait 30 seconds before rebooting the V1
to ensure that the new settings take effect.
(0) Info/Mode
V1 (no.) Displays the V1 Version number
IP and Mask below must be set to conform to your LAN so that you can operate the V1 and upgrade
the firmware via the Ethernet connection.
IP (no.) Displays the current IP number of the V1. (Only part of the IP number is
displayed, to view the rest press TOGGLE)
Set the IP number by using the keypad. Press “.” to jump between the sections.
After inputting the IP numbers press ENTER. You will also need to go to
OPTION MENU (5) Save Setngs and save.
Wait 30 seconds and restart the V1 for the setting to take effect.
Mask (no.) Displays the current IP number of the V1. (Only part of the IP number is
displayed, to view the rest press TOGGLE)
Set the Mask number by using the keypad. Press “.” to jump between the
sections. After inputting the Mask numbers press ENTER. You will also need to
go to OPTION MENU (5) Save Setngs and save.
Wait 30 seconds and restart the V1 for the setting to take effect.
The functions below provide general information about your V1. Please have this information on
hand prior to contacting Doremi technical support.
S/N: (no.) Displays the unique serial number of your V1.
(no.) Megs RAM The total RAM on the V1 motherboard.
V_1.OM.000160.DRM Page 48 of 85 Version 5.2
Doremi Labs