Doremi MCSHD - Manual (Page 57)

10.15 Serial Port
Defines the protocol used on the RS422 PORT1 and RS422 PORT2 located on the back of the unit.
Each port can be individually set to emulate:
P2 Protocol: Sony P2 protocol at 38400 bauds
LD Protocol: Pioneer Laser Disk Protocol at 4800 or 9600 bauds.
1: For Serial Port 1. Select P2 or the LD protocol
2: For Serial Port 2. Select P2 or the LD protocol
10.16 TIME Code
This menu is presented below:
TimeCode Allows to choose between LTC and ATC
A Time Absolute Time. Allows to choose between DF and NDF
10.17
J2K Params
This menu is presented below:
YPbPr Allows to choose between Full and Limited
Reset Encoder Allows to reset the encoder
10.18
VID Mixer
This is an option on the V1-HD to do fade, wipe and dissolve.
V_1.OM.000160.DRM Page 57 of 85 Version 5.2
Doremi Labs