Doremi MCSHD - Manual (Page 19)

4.4 How to Make a Single Video Segment Loop
The procedure below explains how to make a single video segment loop – assuming that the
segment exists.
Figure 12: How to Make a Single Video Segment Loop
4.5 How to Create a Playlist
The procedure below explains how to create a playlist:
Figure 13: How to Create a Playlist
Note: In order to loop the playlist, have the last video segment recall the first video segment.
V_1.OM.000160.DRM Page 19 of 85 Version 5.2
Doremi Labs
Step 1:
Press “RECALL”
Step 2: Enter the segment number
using the keypad numbers
Step 3: Press “++”
Step 4: Enter the same
segment number again Step 5: Press “ENTER” Step 6: Play the looped segment
according to the procedure presented
in the paragraph 4.3 above.
Step 1: Create all the segments that will be
part of the playlist according to the procedure
“How to create a video segment” presented in
paragraph 4.2.
Step 2:
Press “RECALL”
Step 3: Enter the number of the first
segment you want to put in the playlist -
using the keypad numbers
Step 4: Press “++”
Step 5: Enter the
number of the next
segment you want to put
in the playlist – using the
keypad numbers
Step 6: Press “ENTER”
Step 7: Repeat step 2 to step 6 for the segment entered in step 5
in order to chain that segment to another one. Then, repeat step
7 until all the segments you want to process are entered.