Doremi MCSHD - Manual (Page 18)

Step 1:
Press “RECALL”
4.2 How to Create a Video Segment
The procedure below allows you to create a video segment:
Figure 10: Video Segment Creation
Note: “IN” and “OUT” can also be pressed while video is playing.
4.3 How to Play a Video Segment
The procedure below explains how to play a video segment – assuming that the segment exists.
Figure 11: How to Play a Video Segment
V_1.OM.000160.DRM Page 18 of 85 Version 5.2
Doremi Labs
Step 1: Locate to desired
start of video
Step 2: Press “IN” Step 3: Locate to desired
end of video
Step 4:
Press “OUT”
Step 5:
Press “SAVE” Step 6: Assign a number to the
segment using the keypad numbers Step 7: Press “ENTER”
Step 2: Enter the segment number
using the keypad numbers
Step 3:
Press “ENTER”