Doremi MCSHD - Manual (Page 12)

2 Design of Manual
2.1 Product Series
This user manual covers the V1 JPEG2000 and Uncompressed HD series. Although the basic
operation of all V1 products is the same, there are minor differences. When a feature refers to only
one product series, that function will be highlighted in bold with the name of the product as seen in
the examples below:
>>V1-UHD Only
– for the HDTV Uncompressed product series only. If features are
supported on the V1-UHD and not on the V1-UHD/LE that will be
highlighted in the text.
>>V1-HD Only – for the JPEG2000 compression product series only (V1-HD)
2.2 Firmware Versions
This manual was written with the product firmware numbers below:
 HDTV Uncompressed (V1-UHD): 4.62e
 JPEG2000 (V1-HD):
4.62e
 Front Panel (RCV2) firmware 1.20
The V1 firmware can be checked by going to the OPTION MENU (hold the OPTION button then
press the MENU button). Press the up  or down
  Menu buttons till you reach menu number 00. 
Press ++ until you see the version number V1 (no.).
Check the front panel firmware in the CONTROLLER MENU. Hold the ESCAPE button and press
MENU. And then scroll to Firmware.
If you have a newer firmware than shown above, check the addendum pages on the back of this
manual for a list of changes and additions. If you have recently upgraded your firmware please print
out the README document included in the zip file with the new firmware. You can also download
the latest V1 manual from our tech support page “manual” section on the Doremi website
www.doremilabs.com .
If you will not be upgrading, you can download older manuals from the Doremi FTP page.
2.3 Menu Customs
CAPITAL & BOLD text is used when referring to buttons on the front panel.
Menu (no.) text provides the MENU, OPTION MENU, or CONTROLLER MENU name and the menu
function #.
V_1.OM.000160.DRM Page 12 of 85 Version 5.2
Doremi Labs