Doremi MCSHD - Manual (Page 59)

(06) Slomo Mode Configure for single drive operation (V1-HD with independent
record and play option only)
Used for sports slow motion replay applications. When ON, the RCV2
operates like a slow motion controller.
Note: To use Slom Mode, ensure that MENU (2) Time Mode is set to
A-Time. To operate with Time Code, you will need to use an external
controller.
Select Channel 1. Go to the start of the disk by pressing CLEAR then
press GOTO, then start recording.
Select Channel 2 and press the Record button to go in EE mode.
When you see an event worth marking press SAVE, this will increment
the Segment number and save the IN point of the clip minus the
Preroll
value setting. (see Preroll above)
Every time you hit SAVE, the Segment number will increment and
the new time code will be captured.
If you want to recall a specific segment press the ++ or – buttons until
you see the desired Segment number displayed, then press
RECALL. (You can do this while in EE mode)
When you press SloMo, the unit will start playing from that point at the
slow motion speed selected by the Shuttle wheel.
To stop and go back in EE, press STOP followed by the RECORD
button.
Default is “off”.
(07) Gang Mode Not applicable
(08) 4224 Clip Mode Not applicable
V_1.OM.000160.DRM Page 59 of 85 Version 5.2
Doremi Labs