3 rear panel description, 1 video in/out – Doremi MCSHD User Manual
Page 28
5.3 Rear Panel Description
The V1 rear panel differs from one version to another. V1-HD and V1-UHD have the same rear
panel even if differences can be found dues to optional connectors – e.g., audio expansions:
Figure 22: Rear Panel
5.3.1 Video In/Out
Figure 23: Video In/Out
SYNC IN
House Sync input BNC connector for the V1 synchronization reference
– Bi-Level or Tri-level sync input. Locks the V1 to an external sync
source. Sync input should not exceed 1V P-P.
CVBS
Composite Video Reference Output – Standard Video Resolution.
SDI
Serial Digital Interface input and output BNC connectors:
“IN-A” is an HD/SD SDI input, whereas “IN-B” is only valid
when the unit is fitted with a dual link. Then A/B corresponds to the
HD-SDI dual link inputs.
Without dual link, OUT-A1, OUT-A2, OUT-B1 and OUT-B2 are
HD/SD SDI outputs whereas in case of dual link, A1/B1 and A2/B2
represent two dual link outputs couples.
V_1.OM.000160.DRM Page 28 of 85
Version 5.2
Doremi Labs