Doremi MCSHD - Manual (Page 46)

9 Menu
The V1 menu includes the most frequently used settings. Call up the V1 menu by pressing the menu
up arrow key (or down key ). Use the arrow keys to scroll through the menu selections. The
 
TOGGLE button changes the parameters for the selected menu. Press TOGGLE increment or
change a value and hold OPTION and TOGGLE to decrease.
(1) Control This setting emulates the Local/Remote switch found on many Video Tape
Recorders and required by some remote control devices.
Local For front panel control of the V1
Remote For control of the V1 by an external edit controller or workstation
via the rear panel RS-422 connectors
(2) Time Mode Selects the Time Code source of the V1 during recording.
A Time Absolute Time, the time code displayed on the V1 front panel and
present on the TIME CODE OUT connector during playback or
record is generated internally by the V1. A Time represents the
time elapsed since the start of the recording unless a time code
offset has been set.
For NTSC frame-rates the time code out can be outputted as DF or
NDF depending on the selection in OPTION MENU (17).
During record, the V1 will not check for time code input on the LTC
or the ATC and will record at the current location or at the End of
file depending on the selection in OPTION MENU (1).
Time Code The time code out is outputted as DF or NDF depending on the file
type creation, if the file is created with DF then the output will be
DF, if the file is created with NDF then the output will be NDF. In
Time Code mode, the DF/NDF selection in OPTION MENU (17)
does not affect the input or the output.
During record the V1 will latch to the time code input on the time
code in connector or to the SDI embedded ATC depending on the
selection in OPTION MENU (17).
The time code input LTC/ATC should match the file’s format frame-
rate. If the time code input is not present or has the wrong frame
rate, a “wrong time code” message will be displayed.
(03)Sync Source Specifies the sync reference during playback. The V1 is always locked to the
Input when recording.
Internal
59.94 The V1 syncs to its own internal clock (NTSC)
Auto-Bilvl The V1 syncs to the input or to the BiLevel sync source
Input The V1 syncs to the VIDEO IN input.
TriLevel
Sync The V1 syncs to the input or to the TriLevel sync source
Bilevel
Sync The V1 syncs to the input or to the BiLevel sync source
V_1.OM.000160.DRM Page 46 of 85 Version 5.2
Doremi Labs