Doremi MCSHD - Manual (Page 20)

4.6 How to Play a Playlist
The procedure below presents how to play a playlist:
Figure 14: How to Play a Playlist
4.7 Basic Menu Operations
Basic menu operations are presented below:
 Three different menus are available:
o Browse the MENU by pressing the Menu  or  key
o Browse the OPTION MENU by holding the “OPTION” button and press the MENU 
or  key
o Browse the CONTROLLER MENU by holding the “ESCAPE” button and press the
MENU  or  key
 Menu Navigation: To scroll from one menu item to the next, press the MENU  or  keys
 Change a value: Use the “TOGGLE” button or Jog Wheel
 Navigate the submenus: Use the "++"or "--"keys
 Exit the Menu or Abort: Press the “ESCAPE” button
4.8 Setting Record Parameters with the V1 Multi-File System (MFS)
The V1 will always contain one default file (clip). Each file has a default value of 24 hours.
When you create a new file, it will be created with all the settings currently specified in OPTION
MENU
(3) New Rec Set.
To change compression ratio, bit rate, NTSC or PAL etc… change the setting in New Rec Set and
then create a new file as described below:
 To create a new file: hold OPTION and press SAVE. Press ENTER to create the file.
 To load an existing file: hold OPTION and press RECALL. Turn the Jog Wheel to browse
through existing files, press ENTER to load the selected file.
V_1.OM.000160.DRM Page 20 of 85 Version 5.2
Doremi Labs
Step 1:
Press “RECALL” Step 2: Enter the number of the first segment
of the playlist – using the keypad numbers Step 3: Press “ENTER”