Doremi MCSHD - Manual (Page 17)

4 Quick Start Procedures
The quick start procedures provided in this section are the following:
 Navigation, see paragraph 4.1
 How to create a video segment, see paragraph 4.2
 How to play a video segment, see paragraph 4.3
 How to make a single video segment loop, see paragraph 4.4
 How to create a playlist, see paragraph 4.5
 How to play a playlist, see paragraph 4.6
 Basic Menu Operation, see paragraph 4.7
 Setting record parameters with the V1 multi-file system (MFS), see paragraph 4.8
 Setup V1 for playback, see paragraph 4.9
 Setup V1 for record, see paragraph 4.10
 Remote Operation, see paragraph 4.11
 Save current settings to memory, see paragraph 4.12
 Getting the firmware version number of the V1, see paragraph 4.13
4.1 Navigation
The procedure below allows you to navigate within the video on the drive according to a starting
point that you choose.
Figure 9: Navigation
V_1.OM.000160.DRM Page 17 of 85 Version 5.2
Doremi Labs
Step 1: Press “CLEAR”
Step 2: Choose the time code using
the keypad numbers
Step 3: Press “GOTO”
Step 4:
Press the
corresponding
key above the
jog/shuttle
wheel: “JOG”,
“SHUTTLE” or
“SLO MO”.
Step 5: Use the Jog/Shuttle wheel in order to view
the video -
“JOG” is the inner wheel, “SHUTTLE”
is the ring and “SLO MO” is the ring.