Doremi MCSHD - Manual (Page 73)

13.2.2 Recording the Left-Eye
The audio should be recorded with the Left-Eye.
 Select “A Time” in the Time Code Mode menu (menu 02).
 Press the REC button only to set the V1-HD in EE mode. (Displays the video on the input).
 If you see a valid video signal on your monitor, press REC and PLAY at the same time to
start recording. The time-code will start incrementing one the V1-HD is in record.
 Press STOP to finish the recording the Left-Eye.
13.2.3 Recording the Right-Eye
 Before recording the Right-Eye: locate to a time code location beyond the end of the
recorded video (Example: if the Left-Eye starts at 00:00:00:00 and ends at 00:10:00:00
locate to 01:00:00:00. To locate enter the time code value using the keypad and then press”
Go To”)
 Press the REC button only to set the V1-HD in EE mode. (Displays the video on the input).
 If you see a valid video signal on your monitor, press REC and PLAY at the same time to
start recording. The time-code will start incrementing one the V1-HD is in record.
 Press STOP to finish the recording the Right-Eye.
Note: the V1 will record at the current position or at the end of file depending on the “Rec at:” setting
in OPTION MENU (01) “Transport”. For this operation set the “Rec at: to current position.
V_1.OM.000160.DRM Page 73 of 85 Version 5.2
Doremi Labs