EXFO PSO-200 Optical Modulation Analyzer - Manual (Page 149)

SCPI Commands Reference
Optical Modulation Analyzer 141
Product-Specific Commands—Description
:SENSe:DDEMod:AVERage:STATe
Description This command sets the average mode status.
At *RST, this value is set to OFF.
Syntax :SENSe:DDEMod:AVERage:STATe
>
Parameter(s) Mode:
The program data syntax for is defined
as a element. The
special forms ON and OFF are
accepted on input for increased readability. ON
corresponds to 1 and OFF corresponds to 0.
Enables or disables the average Mode state.
ON, enables the average Mode state.
OFF, disables the average Mode state.
Example(s) SENSe:DDEMod:AVERage:STATe ON
See Also SENS:ROSC:SOUR:PHAS ON