EXFO PSO-200 Optical Modulation Analyzer - Manual (Page 13)

Optical Modulation Analyzer 5
2 Safety Information
Laser Safety Information
Your instrument is a Class 1 laser product in compliance with standards
IEC 60825-1 2007 and 21 CFR 1040.10. Laser radiation may be encountered
at the output port.
The following label indicates that a product contains a Class 1 source:
Note: The label is located at the back of the unit.
W
ARNING
Do not install or terminate fibers while a light source is active.
Never look directly into a live fiber and ensure that your eyes are
protected at all times.
W
ARNING
The use of controls, adjustments and procedures other than those
specified herein may result in exposure to hazardous situations or
impair the protection provided by this unit.
I
MPORTANT
When you see the following symbol on your unit , make sure
that you refer to the instructions provided in your user
documentation. Ensure that you understand and meet the required
conditions before using your product.