EXFO FTB -5240S/5240BP Optical Spectrum Analyzer for FTB 500 (NS-1434) - Manual (Page 50)

Setting Up the Instrument in WDM Mode
42 FTB-5240S/5240BP
Defining Preferences
3. Under System and link information, define the following parameters
as needed:
³
Link ID prefix: Sets the prefix value for the link ID. You can enter
any alphanumeric value.
³
Starting value: Sets the suffix increment starting value for the link
ID.
This value is incremented each time a new file is saved provided
the Auto Increment option is selected.
³
Orientation: Sets the orientation of the link.
³
System: Sets the system information.
4. Under Location Information, define the following parameters as
needed:
³
Network element: Sets the type of network element.
³
Test point: Sets the test point.
³
Description: Enter the description of location if required.
5. Press OK to save the changes and close the window, or press Cancel to
exit without saving.
Press Restore Defaults to remove all the changes and apply the default
values.
I
MPORTANT
When the Auto Increment option is not selected, while saving the trace
file, you have to manually change the file name, else the application will
overwrite the previously saved files every time you save a new trace.