Usb 2.0 (win2000), Hot-key (win2000), Touchpad (win2000) – Eurocom D270ES VIPER User Manual
Page 95
Drivers & Utilities
4 - 6 Windows 2000 Professional
4
USB 2.0 (Win2000)
The USB 2.0 driver is only required for Model A
(see
).
1. Click Start (menu) > Run
...
2. Navigate (Browse...) to
D:\Drivers\USB20\USB20.exe and click Open
> OK.
3. Click Yes > Accept.
4. Click Yes to restart the computer.
Hot-Key (Win2000)
1. Click Start (menu) > Run
...
2. Navigate (Browse..) to
D:\Drivers\HOTKEY\CNK001.exe and click
Open > OK.
3. Choose the language you prefer, and click OK.
4. Click Next.
5. Click Finish to restart your computer.
6. You may then configure your Hot-key Buttons
as outlined in
TouchPad (Win2000)
1. Click Start (menu), point to Settings and click
Control Panel. Double-click System (icon)
and then click Hardware (tab) > Device Man-
ager (button).
2. Click “+” next to Mice and other pointing
devices (if its sub-items are not shown).
3. Double-click PS/2 Compatible Mouse and
click Driver (tab).
4. Click Update Driver (button) and click Next.
5. When the Install Hardware Device Drivers
window appears, select “Search for a suitable
driver for my device (recommended)” and
click Next.
6. Select ONLY (make sure the other boxes do not
have a tick inside them) “Specify a location”,
and click Next.
7. Navigate (Browse...) to
D:\Drivers\TOUCHPAD\WIN2000.
8. Click Open > OK > Next.
9. Click Finish and close the open windows.
10.Click Yes to restart your computer.
11.You may then configure your TouchPad as
outlined in
.