Eurocom D270ES VIPER - Manual (Page 93)

Drivers & Utilities
4 - 4 Windows 2000 Professional
4
Windows 2000 Professional
This section covers driver and utility installation in-
structions for Windows 2000 Professional.
Audio (Win2000)
1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
D:\Drivers\Audio\Setup.exe and click Open >
OK > Next.
3. Click Finish to restart your computer.
4. Go to the Sounds and Multimedia control
panel (Start menu and point to Settings and
click Control Panel then double-click the
Sounds and Multimedia icon).
5. Click the Audio tab.
6. Click Advanced in the Sound Playback menu.
7. Under Speaker Setup select 5.1 Surround
Speakers from the pull-down menu and click
OK > OK to close.
8. In addition to the Sounds and Multimedia
control panel, you can click the icon in the
taskbar to go to the AC97 Audio
Configuration window for further
configuration options.
Modem (Win2000)
1. Click Start (menu), point to Settings and
click Control Panel. Double-click System
(icon) and then click Hardware (tab) >
Device Manager (button).
2. Click “+” next to Other devices (if its sub-
items are not shown).
3. Double-click PCI Device, click Driver (tab)
and Update Driver (button).
4. When the Upgrade Device Driver Wizard
appears, click Next.
5. When Install Hardware Device Drivers
appears, select “Search for a suitable driver
for my device (recommended)” and click
Next.
6. When Locate Driver Files appears, select
ONLY “Specify a location” and click Next.
7. Navigate (Browse...) to
D:\Drivers\Modem\win2000 and select the
visible file by clicking it.
8. Click Open (button) and click OK (button),
then click Next.
9. Click Finish, and close the open windows.