Eurocom D270ES VIPER User Manual
Page 137
Troubleshooting
7 - 8 Power
7
The battery pack will not
charge.
The battery pack is exposed to an excessively hot or cold environment. Place the battery
in a suitable environment and after it returns to normal temperature try again. The battery
may be bad and may need to be replaced, contact your service center for more details.
The battery pack will not
charge and the charge
indicator light is off.
The battery is already fully charged and the indicator light is broken.
A beeping sound is heard
and the low-battery
indicator is on.
The battery power is nearly used up. Connect the AC adapter to your computer.
A beep isn’t heard when
the low-battery indicator
turns on, or the gauge
indicates power is less
than 10%.
The battery power is nearly used up and the volume control may be turned down. Adjust
the volume control and connect the computer with the AC adapter.
Actual battery operating
time is shorter than
expected.
The battery has not been fully discharged before being recharged. Make sure the battery
is fully discharged and recharge it completely before reusing (see
Power Options have been disabled. Go to the Control Panel in Windows and re-enable
the options.
A peripheral device or PC Card is consuming a lot of power. Turn off the unused device to
save power.
Problem
Possible Cause - Solution