Eurocom D270ES VIPER - Manual (Page 117)

BIOS Utilities
5 - 18 Boot Menu
5
Configuring the Network Boot Protocol
The system supports booting from FDD, HDD, CD or LAN. To boot from a
network, set Network Boot as the first item in the boot order.
Follow the full
instructions in the sidebar to configure the network boot protocol.
Enabling Network
Boot
Go to the Boot Menu.
Set the Network Boot
option to the first prior-
ity in the list.
Save the changes and
exit.
At startup, press and
hold the Shift and F10
keys.
Configure the network
protocol.
Save the settings to
automatically boot
from the network.
Realtek RTL8139(A/B/C)/RTL8130 Boot Agent
Configuration Menu v2.11
Network Boot Protocol PXE
Boot Order Int 19h
Show Config Message Enable
Show Message Time 3 Seconds
RPL
Always boot network first, then local devices
Quit Change Value Next Option Save/Quit
Figure 5 - 7
Boot Agent Menu