Eurocom D270ES VIPER - Manual (Page 85)

Advanced Controls
3 - 22 Enabling Power Options
3
Configuring the Power Button
The power button may be set to send the computer in to either Standby or Hi-
bernate mode (
Figure 3 - 14 ). In Standby mode, the LED will flash
green. In Hibernate mode the LED will be off. If you are in a power saving
mode set to save power through individual components (e.g. hard disk, mon-
itor), the LED will remain green.
Sleep Button
You may also config-
ure the Suspend/
Resume key combina-
tion (Fn + Esc) from
the menu illustrated in
Figure 3 - 14 . In Win-
dows, this is referred
to as the Sleep button.
Figure 3 - 14
Power Options
(Advanced - Power
Buttons)
Power Button Sleep Button