Eurocom D270ES VIPER - Manual (Page 94)

Drivers & Utilities
Windows 2000 Professional 4 - 5
4
10. The modem is ready for dial-up
configuration .
LAN (Win2000)
1. Click Start (menu) , point to Settings and click
Control Panel. Double-click System (icon)
and then click Hardware (tab) > Device
Manager (button).
2. Click “+” next to Network Adapters (if its sub
items are not shown).
3. Double-click Realtek RTL8139(A)-based PCI
Fast Ethernet Adapter and click Driver (tab).
4. Click Update Driver (button).
5. When the Upgrade Device Driver Wizard
appears, click Next.
6. When Install Hardware Device Drivers
appears, select “Search for a suitable driver
for my device (recommended)” and click
Next.
7. When Locate Driver Files appears, select
ONLY “Specify a location” and click Next.
8. Navigate (Browse...) to
D:\Drivers\LAN\Win2000 and select the
visible file by clicking it.
9. Click Open (button) and click OK (button),
then click Next.
10.Click Finish and close the open windows.
11. The network adapter is now ready for
configuration .
Video (Win2000)
1. Click Start (menu) > Run ...
2. Navigate (Browse..) to
D:\Drivers\VIDEO\Win2K&XP\SETUP.EX
E and click Open > OK.
3. When the Welcome screen appears click Next >
Next > Next > Next.
4. Click Finish to restart the computer.
5. See “Advanced Video Controls” on page 3 - 2
for details on adjusting the video settings.
Modem Country Selection
Be sure to check if the modem country selection is ap-
propriate for you (Control Panel > Phone and Mo-
dem Options and select a Country).