Configuring the infrared settings for fir, Infrared communication, Configuring the infrared settings for fir -25 – Eurocom D270ES VIPER User Manual
Page 88: Configuring the infrared settings for
Advanced Controls
Configuring the Infrared Settings for FIR 3 - 25
3
Configuring the Infrared Settings for FIR
For Models A & B only - Users will need to change the settings for the infra-
red device in the BIOS (see
“I/O Device Configuration (Advanced Menu)”
) to enable the FIR setting support.
To configure your computer for Fast Infrared (FIR) communication follow
these steps:
1.
Click Start, point to Settings and click Control Panel.
2.
Double-click Wireless Link icon.
3.
Click Hardware (tab), then click Properties (button).
4.
Select Advanced (tab).
5.
Select “Infrared Transceiver A” and change the Value to “HP HSDL-
2300/3600”.
6.
Click OK > OK.
For further information, please refer to the manual of the device you wish to
connect.
Infrared
Communication
The infrared transceiv-
er operates on a “Line
of Sight”.
Make sure nothing is
blocking the “Line of
Sight” between your
system’s transceiver
and the destination’s
transceiver.