Warning codes – Echelon FTXL User Manual
Page 249
FTXL User’s Guide
237
LID#
Description
62 Insufficient
buffer
space
The message includes the total number of bytes available for
transceiver buffers and how many additional bytes your selected
configuration requires.
Warning codes
(warning codes start at 4000)
LID#
Description
4001
An XIF file contains more fields than expected
Refer to the warning message for line # and filename. This might
result in an automatic downgrading of the device interface file to the
version supported by the FTXL or ShortStack tools. Check
for available updates.
4002
An intermediate file cannot be removed in the sweep-phase. See
message for details
Refer to the warning message for details about the warning cause.
The sweep occurs when the utility’s operation is complete and the
utility did not run in the Trace verbosity level. The warning indicates
that an intermediate file cannot be removed.
4003
Warning code not in use.
4004
Warning code not in use.
4005
Warning code not in use.
4006
A file cannot be copied
This is possibly, but not necessarily, fatal. When the LonTalk
Interface Developer utility creates the host framework, it produces
several files based on input provided by the user. It also copies the
necessary files into the destination folder. The utility-generated files
refer to these files, which are required to build the host application.
Thus, this issue is non-fatal for the LonTalk Interface Developer
utility, but probably fatal when building the host application. See
also warning LID#4017.
4007
Warning code not in use.
4008
Warning code not in use.