Echelon FTXL - Manual (Page 128)

116 LonTalk Interface Developer Command Line Usage
Note that the type and number for the --buffer switch are separated by a period.
You can include several buffer specifications within a single --buffer switch,
separated by commas, or with multiple --buffer switches. For example:
--buffer=ai.5,ao.3
--buffer=ai.5 --buffer=ao.3
Table 11. Buffer-Type Specifications for the --buffer Command Switch
Buffer Type
Primary
Specification
Alternate
Specifications Valid Values
Application input
buffers
ai appinput
appin
application-input
1 to 100
Default: 5
Application output
buffers ao appoutput
appout
application-output
1 to 100
Default: 3
Application output
priority buffers
aop appoutputprio
appoutprio
appprio
application-priority-
output
1 to 100
Default: 2
Link-layer buffers ll linklayer
link-layer
link 1 to 100
Default: 2
Network input
buffers
nis netinsize
network-input-size
1 to 100
Default: 11
Network output
buffers nos netoutsize
network-output-size
1 to 100
Default: 3
Network input
buffer size ni netinput
netin
network-input
1 to 100
Default: 11
Network output
buffer size
no netoutput
netout
network-output
1 to 100
Default: 3