Echelon FTXL - Manual (Page 127)

FTXL User’s Guide 115
Command Switch
Long Form
Short
Form Description
--source -n Use the specified model file
--spdelay -p Set the service pin notification delay (255=default,
0=off)
--txdb -t Manage specified number of transmit transaction
records
--txttl -T Let transmit transactions expire after specified number
of microseconds
--verbose -v Run with verbosity level 0 (normal), 1 (verbose), or 2
(trace)
--verbosecomments -V Generate verbose comments
--warning Display specified message type as a warning
Specifying Buffers
The --buffer (-B) command switch specifies a number of buffers of a specified
type. The supported types of buffers are:
• Application input buffers
• Application output buffers
• Application output priority buffers
• Link-layer buffers
• Network input buffers
• Network output buffers
• Network input buffer size
• Network output buffer size
• Network output priority buffers
For each of these buffer types, you can specify a number of buffers using the
following syntax:
--buffer=buffer_type.number
where buffer_type can be any of the specifications listed in Table 11 on page 116,
and number is the number of that type of buffer. Each of the specifications has
several allowable values; the table lists the primary specification and allowable
alternate specifications.