Ftxl event handler functions, Commonly used event handler functions – Echelon FTXL User Manual
Page 164
152
FTXL LonTalk API
Function
Description
LonQueryConfigData()
Queries local configuration data on the FTXL device.
LonQueryDomainConfig()
Retrieves a copy of the local domain table record from the
FTXL device.
LonQueryNvConfig()
Queries configuration data for theFTXL device’s network
variable table.
LonQueryStatus()
Requests local status and statistics.
LonQueryTransceiverStatus() Requests the local status of the FTXL Transceiver.
LonSetNodeMode()
Sets the operating mode for the FTXL device:
• Online: An online device executes its application
and responds to all network messages.
• Offline: An offline device does not execute its
application or respond to network messages. It will
respond to network management messages.
• Configured: The device is ready for network
operation.
• Unconfigured: The device is not ready for network
operation.
LonUpdateAddressConfig()
Sets configuration data for the FTXL device’s address table.
LonUpdateAliasConfig()
Sets configuration data for the FTXL device’s alias table.
LonUpdateConfigData()
Sets configuration data on the FTXL device.
LonUpdateDomainConfig()
Sets a domain table record on the FTXL device.
LonUpdateNvConfig()
Sets configuration data for the FTXL device’s network
variable table.
FTXL Event Handler Functions
The FTXL LonTalk API provides event handler functions for managing network
and device events.
Commonly Used Event Handler Functions
Table 17 on page 153 lists the event handler functions that you will most likely
need to define so that your application can perform application specific processing
for certain L
ON
W
ORKS
events. You do not need to modify these callback
functions if you have no application-specific processing requirements.