ADLINK PCI-8134A - Manual (Page 15)

Introduction
• 5
 Pulse rate setting steps: 0 to 2.4Mpps.

I/O Signals:
 Input/Output Signals for each axis
 All I/O signal are optically isolated with 2500Vrms isolation voltage
 Command pulse output pins: OUT and DIR.
 Incremental encoder signals input pins: EA and EB.
 Encoder index signal input pin: EZ.
 Mechanical limit/switch signal input pins:
±EL, SD and ORG.
 Servomotor interface I/O pins: INP, ALM and ERC.
 General purpose digital output pin: SVON.
 General purpose digital input pin: RDY.
 Pulser signal input pin: PA and PB.
 Simultaneous Start/Stop signal I/O pins: STA and STP.

General Specifications
 Connectors: 100-pin SCSI-type connector
 Operating Temperature: 0
° C ~ 50° C
 Storage Temperature: -20 ° C ~ 80° C
 Humidity: 5 ~ 85%, non-condensing
 Power Consumption:
∗ Slot power supply (input): +5V DC ±5%, 900mA max.
∗ External power supply (input): +24V DC ±5%, 500mA max.
∗ External power supply (output): +5V DC ±5%, 500mA, max.
∗ PCI-8134 Dimensions: 164mm(L) X 98.4mm(W)
∗ PCI-8134A Dimensions: 185mm(L) X 100mm(W)