ADLINK PCIe-7360 - Manual (Page 29)

Getting Started 19
PCIe-7360
2 Getting Started
2.1 Unpacking Checklist
Before unpacking, check the shipping carton for any damage. If
the shipping carton and/or contents are damaged, inform your
dealer immediately. Retain the shipping carton and packing mate-
rials for inspection. Obtain authorization from your dealer before
returning any product to ADLINK. Check if the following items are
included in the package.
X PCIe-7360 high-speed DIO card
X ADLINK All-in-One CD
X Quick Start Guide
If any of the items is damaged or missing, contact your dealer
immediately.
2.2 Installing the Card
Install the card driver before you install the card into your com-
puter system. See “Software Support” on page 11. for driver sup-
port information.
To install the card:
1. Turn off the system/chassis and disconnect the power
plug from the power source.
2. Remove the system/chassis cover.
3. Select the PCI Express slot that you intend to use, then
remove the bracket opposite the slot, if any.
4. Align the card connectors (golden fingers) with the slot,
then press the card firmly until the card is completely
seated on the slot.
CAUTION:
The card must be protected from static discharge and physical
shock. Never remove any of the socketed parts except at a
static-free workstation. Use the anti-static bag shipped with the
product to handle the card. Wear a grounded wrist strap when
servicing.