YSI 9600 - Manual (Page 116)

4 - You can change the units of the displayed parameters by going into the Parameter submenu of the
Setup Menu.
5 - You can change the order of the parameters by going into the Add/Remove Parameters dialog box in
the Parameter submenu of the Setup Menu.
6 - You can set the scaling options for your data by double-clicking on the Y-axis of the graph and using
the Graph Y-Axis dialog box to set the scales.
7 - After setting the display parameters enter the Setup Menu and choose Set Default Template. Now
every data file that you initially open will use the display parameters that you have chosen. If you want to
delete your template, enter the Setup Menu and choose Clear Default Template.
CLEAR DEFAULT TEMPLATE
This command will eliminate a default template that has been saved. With no default template, all new
EcoWatch files open in whatever form they were saved in.
7.6.8 APPL(ICATIONS)
NOTE CAREFULLY: The APPL selection cannot be used with the Model 9600 Nitrate Monitor.
7.6.9 WINDOW
The Window menu offers the following commands that enable you to arrange multiple views of multiple
documents in the application window:
CASCADE
Use this command to arrange multiple opened windows in an overlapped fashion
TILE HORIZONTAL
Use this command to vertically arrange multiple opened windows in non-overlapped horizontal tiles.
TILE VERTICAL
Use this command to arrange multiple opened windows side by side.
ARRANGE ICONS
Use this command to arrange the icons for minimized windows at the bottom of the main EcoWatch
window. If there is an open document window at the bottom of the main window, then some or all of the
icons may not be visible because they will be underneath this document window.
YSI Environmental 116 Model 9600 Nitrate Monitor