YSI 9600 - Manual (Page 115)

Page Title
This is where you can enter a title for the graph. The title may have one or two lines.
1 Trace per Graph
Choose this to have just one parameter on each graph.
2 Traces per Graph
Choose this to have two parameters on each graph.
TABLE
If there is no table, then the commands on this submenu will be unavailable. The Table submenu offers the
following commands:
Font/Color
Goes to the Font Dialog Box where you can change the font and color of text that appears
in the table.
Page Color
Goes to the Color Dialog Box where you can change the color of the table background
color. That is the part of the table where the readings appear.
Highlight Color
Goes to the Color Dialog Box where you can change the color of the table highlight
color. That is the part of the table where the reading units appear.
SET DEFAULT TEMPLATE
This option allows you to select display parameters for your data when you initially open a file in
EcoWatch. Display parameters include background and trace colors on your graph, which parameters are
displayed, parameter ordering, parameter units, and scaling of those parameters (either manual or
automatic). The first time you use EcoWatch with a data file, graphing will proceed according to the default
settings present in EcoWatch. For example, graph backgrounds will all be black, traces will be plotted each
with a different color, all parameters will be auto-scaled, and if your sonde measures conductivity and
dissolved oxygen, EcoWatch will display specific conductance in mS/cm and dissolved oxygen in mg/L.
You can change the default settings by using Set Default Template.
1 - Open a data file and observe the presentation of the data in graphic and tabular form.
2 - You can change the background and trace colors by going into the Graph and/or Table submenus of
the Setup Menu.
3 - You can add or remove parameters by going into the Parameter submenu of the Setup Menu.
YSI Environmental 115 Model 9600 Nitrate Monitor