Toa C-CC774 PL - Manual (Page 55)

55
8.6. Time Setting
Specify the period of time that alarm conditions are maintained when an alarm signal is received.
1. On the Alarm Setting screen, select “INTERVAL”, then press
the Set key.
2. On the Alarm Time Setting screen, select the number, then
press the Set key.
3. Select “3sec,” “5sec,” “10sec,” “15sec,” “20sec,” “30sec,”
“45sec,” “1min,” “3min,” “5min,” or “Level” with the joystick,
then press the Set key to confirm the duration that alarm
conditions are maintained.
When the Alarm Report is set to ON, pressing the Set key
transmits the alarm input signal for the preset period of time to
the controller.
Note
Level will continue alarm status during alarm signal reception.
4. Repeat Step 2, 3 to perform duration settings.
Alarm setting screen
I N P U T
* A L A R M *
R E P O R T
A C T I V E S T A T E
P R I O R I T Y
A C T I O N
I N T E R V A L
R E S E T A C T I O N
A L A R M D A T A
Alarm time setting screen
* A L A R M *
I N T E R V A L
- - - - - - - - - - - - - - - - - - - - - - - - - - -
1 : 2 0 s e c
2 : 5 s e c
3 : 2 0 s e c
4 : 2 0 s e c
6 : 2 0 s e c
5 : 2 0 s e c
7 : 2 0 s e c
8 : 2 0 s e c