Toa C-CC774 PL - Manual (Page 48)

48
Note
When selecting preset playback, select “
*** POS” with the joystick, enter the position number, then press
the Set key.
Choice Selected contents 1
*** POS SPA / SP8 / SP16 / SP24 /
SP40 / SP60 / SP90 / SP120 /
SP160 / SP240 / SP360 1sec / 2sec / 3sec / 5sec /
10sec / 20sec / 30sec
TRACE 1 / TRACE 2
1TIME / 2TIME / 3TIME / 4TIME / 5TIME
1TIME / 2TIME / 3TIME / 4TIME / 5TIME
B/W ON / B/W OFF
AUX1 ON / AUX1 OFF /
AUX2 ON / AUX2 OFF
TOUR 1 – 16
STOP
Note: For the details of choice and contents, refer to Step 5-1 afterward.
Selected contents 2
5-1 When preset playback “ *** POS” is selected
(1) Enter the position number with the numerical keypad, then press the Set key. Pressing the Set key again
confirms the number.
(2) Select the preset transfer speed of Pan and Tilt from “SPA,” “SP8,” “SP16,” “SP24,” “SP40,” “SP60,”
“SP90,” “SP120,” “SP240,” or “SP360” with the joystick, then press the Set key.
Note
The figure represents the maximum speed of Pan and Tilt (rotation angle per second) when performing
the preset transfer.
“A”: Operates at a constant speed of “25” without acceleration or deceleration.
(3) Select the stop duration after preset playback completion from “1sec,” “2sec,” “3sec,” “5sec,” “10sec,”
“20sec,” or “30sec” with the joystick, then press the Set key.
This will record the program.
5-2 When “TRACE” or “TOUR” is selected
(1) Select the repeat times of Trace or Tour from “Once” – “5 times” with the joystick, then press the Set key.
This will record the program.
5-3 When “AUX ON,” “AUX OFF,” “B/W ON,” “B/ W OFF,” or “STOP” is selected
This will record the program.
6. Programming all desired operations to be set in the selected tour number completes the settings.