Toa C-CC774 PL - Manual (Page 43)

43
Limit setting in progress screen
* * * - L E F T
L I M I T S E T T I N G
Limit setting screen
- - - - -
* A U T O P A N *
O P T I O N
P A U S E T I M E
S P E E D
D I R E C T I O N
L I M I T
L I M I T R E S E T
R E V E R S E
1 s
L E F T
L E F T
L E F T
* +
[ When setting the limit location of Auto Pan rotation ]
1. On the Auto-Pan Setting screen, select “LIMIT” with the
joystick, then press the Set key.
2. Select “LEFT”, then press the Set key.
The Limit Setting screen (left limit) is displayed.
Note
In the Place of “
*** ” on the Limit Setting screen, the camera
number is displayed.
3. Set the desired angle of view with the joystick, zoom key and
focus key, then press the Set key.
The left limit location of Auto Pan rotation is recorded.
3-1 When setting the right limit location as well
Select “RIGHT” with the joystick, then press the Set key.
Since the Limit Setting screen (right limit) is displayed, set
the right limit location in the same way as Step 3 above.
3-2 When setting no right limit location
Exit the Camera Menu screen by pressing the menu start
switch or press CLEAR key on the Limit Setting Screen of
Step 3-1.
[ Deleting the set limit location of Auto Pan rotation ]
1. On the Auto-Pan Setting screen, select “LIMIT RESET” with
the joystick, then press the Set key.
2. Select limit location to delete either “LEFT” or “RIGHT” with the
joystick, then press the Set key.
3. “LIMIT RESET OK?” appears, then press the Set key.
The selected limit location will be deleted.
Limit reset screen
- - - - -
* A U T O P A N *
O P T I O N
P A U S E T I M E
S P E E D
D I R E C T I O N
L I M I T
L I M I T R E S E T
R E V E R S E
1 s
L E F T
L E F T
L E F T
* +
7.2.5. Setting or deleting the Auto Pan limits
Set both the left and right limits of Auto Pan rotation.
When only either the left or right limit is stored, the Auto Pan operation returns at a set point according to the
setting of the direction of Auto Pan rotation, that is, the camera is reversed for every 360° rotation. When the
tilting position, zoom, and focus position differ between the left and right limits, data last set are stored. In this
event, an intermediate panning point between both limits, and last set tilting position, zoom, and focus position
are first played back, and then the Auto Pan operation begins.