Toa C-CC774 PL - Manual (Page 30)

30
5.5. Frame Adjustment Setting
Adjust the character display position.
1. With the joystick, select “FRAME ADJUST” on the ID setting
screen and press the Set key.
2. With the joystick, move the character display position with the
indicated markers as a guide, then press the Set key.
Titles and menu character display positions are adjusted
simultaneously.
Frame adjustment setting screen
5.6. Angle Origin Point (Zero point) Change
Change the origin point of the angle (Zero point) display.
1. With the joystick, select “ZERO POINT” on the ID setting
screen, and press the Set key.
2. With the joystick (after tilting upward and downward, tilt left
and right when the controller other than the C-RM500 is
connected), move the camera to the position to be set as the
origin point (0°/ 0°), then press the Set key.
Note
Once the setting has been made, it cannot be cleared unless it
is reset to factory settings.
Angle origin point setting screen
Z E R O P O I N T S E T T I N G
* * * / - * * *
5.4.2. Initializing the common title display position
All set display positions and lengths can be reset to initial factory-preset conditions.
1. With the joystick, select “PATTERN CLEAR” on the ID display
position setting screen and press the Set key.
The arrow
moves to the “NO” position.
2. With the joystick, select “YES,” then press the Set key.
The title setting position and its length revert to factory-preset
conditions.
( )
* L O C A T I O N S E T T I N G *
A U X
A N G L E D I S P
Z O O M D I S P
D A T E D I S P
T I M E D I S P
P A T T E R N C L E A R
F R O N T P A G E
P A T T E R N C L E A R Y E S