854 sprayer control – TeeJet 854 Sprayer Control User Manual
Page 48
www.teejet.com
43
854 Sprayer Control
Sensor.LED.Alarms
The 854 has sensor LED’s across the top of the
display. These LED’s help alert the operator to
problems with the sprayer, sprayer control system, or
application.
Speed Sensor LED Alarm - LED displays a
red light if the console loses speed signals.
Flow Sensor LED Alarm - LED displays a
red light if the console loses flow signals.
Pressure Sensor LED Alarm - LED displays
a red light if the console loses pressure
signals.
!
General LED Alarm - This LED alarm is
used for discrepancies between the flow
meter and pressure transducer if both are
installed and programmed.
No Speed Alarm
NOTE: This alarm only occurs when the Master
Boom Switch is in the “On” position.
If the 854 stops receiving pulses from the speed
sensor, the speed display window will flash. The
Speed Sensor LED Alarm will be displayed. A tractor
symbol will flash at the top of the display.
The Red LED will illuminate over the Speed Sensor
Alarm.
NOTE: An audible alarm is activated when this
feature is enabled. It will provide a steady
beep, indicating Medium Priority.
Figure 7-8: No Speed Alarm
MPH
0.0
0.0
45
642
No Flow Alarm
NOTE: This alarm only occurs when the Master
Boom Switch is in the “On” position.
This alarm indicates that the flow meter has stalled
or there is a problem elsewhere in the system. If the
854 stops receiving pulses from the flow meter, the
turbine symbol will flash at the top of the console.
The red LED will illuminate over the Flow Sensor
Alarm.
NOTE: An audible alarm is activated when this
feature is enabled. It will provide a steady
beep, indicating Medium Priority.
Figure 7-9: No Flow Alarm
32.50
4.8
0.0
0
PSI
MPH
Ac
GPA