TeeJet 854 Sprayer Control - Manual (Page 17)

www.teejet.com
12
854 Sprayer Control
PSI
112 PHi
1-10 SenS
PSI
112
PHi
PrS SEnS
Memory.Save.Function
The Memory Save Function allows for a custom
set of programming parameters. Typically, this is
performed after all three programming sections have
been completed for the console.
Select “Yes” to save all program settings to memory.
These settings can be recalled in the System Setup
Mode during the Mem Load function.
This function is typically used to get the console
back to the starting point after unknown changes
have been made to the program modes.
• Use the PLUS or MINUS keys to select
either “Yes” or “No”.
• Press the PROGRAM key to accept the
value and advance to the next step.
Figure 3-22: Memory Save Function
SAvE
SAvE
yes
The OEM Programming Mode of the 854 is now
complete. Press the PROGRAM key to return to
the beginning step of the process. Press and hold
the PROGRAM key to exit and save the OEM
Setup Mode. This can be performed at any time
during OEM programming. The console will exit the
OEM programming and return to normal operations.