2re6 spd fime, 854 sprayer control, Regulating.valve.speed.-.fine. adjustment – TeeJet 854 Sprayer Control User Manual
Page 28: Tank.volume
![background image](/manuals/713582/28/background.png)
www.teejet.com
23
854 Sprayer Control
Regulating.Valve.Speed.-.Fine.
Adjustment
The fine adjustment controls the speed of the valve
when small adjustments in flow are required by the
controller.
• Use the PLUS or MINUS keys to
increase or decrease the response time.
Any number between 0 - 9 can be selected.
0 = slow
9 = fast
Start with a fine adjustment speed of “2”. This works
well in most situations. The number may need to be
optimized during the spraying operation.
• Press the PROGRAM key to accept the
value and advance to the next step.
Figure 4-24: Fine Adjustment
2
re6
spd
FIme
NOTES: Adjusting agitation volumes can assist the
regulating valve operation.
The speed value can be adjusted to
optimize system performance. If the valve
searches for the programmed application
rate by cycling the pressure up and down
continuously, reduce the number until
the searching is minimized or eliminated.
A higher number will increase the valve
response speed and increase the rate of
adjustment.
Tank.Volume
In addition to accumulating the total volume applied,
the 854 tracks the volume down from the maximum
tank content to 0 gallons (liters). This allows for the
monitoring of remaining tank volume.
• Use the PLUS or MINUS keys to enter
the maximum volume of the sprayer tank in
gallons (liters).
• Press the PROGRAM key to accept the
value and advance to the next step
Figure 4-25: Tank Volume
0