TeeJet 854 Sprayer Control - Manual (Page 31)

www.teejet.com
26
854 Sprayer Control
Communications
The Communications step allows for the selection of
the type of communications (if any) used.
Available choices include:
• NO CON - no external communications
• PRT - memory printing
• GPS - global positioning satellite system/
variable rate communication capability
• LOG - downloading to a PC with on-the-go
capabilities
• PC - PC link
• Use the PLUS and MINUS keys select
the type of communications being used.
• Press the PROGRAM key to advance to the
next step.
Figure 4-32: Communications
prt
Printing Memory Contents
• Connect the 854 console to the 78-20002
printer using a 45-2004 printer cable.
• Select PRT in the Communications Setup step.
• The Boom Master Switch must be set to “Off”.
• Press the MEMORY key. The first screen
displayed will be the MEM PRN Screen.
• Press the PROGRAM key to advance to the
next step.
Figure 4-33: Printing Memory Contents
prt MeM
• Only information stored in the memory locations
can be printed.
• Press the MEMORY key to launch the PRN
TOT screen, which will allow for the printing of
contents of the Total Memory locations and any
individual memory locations (1-9) that contain
data.
Figure 4-34: Printing Memory Totals
TOT MeM
• Continue pressing the MEMORY key to
display screens 1-9, which represent memory
locations 1-9.
• When the desired location is displayed, press
the PROGRAM key to print the report.
• To exit from the Print Menu, press and hold
either the MEMORY key or the PROGRAM
key to return to the Memory Menu.