TeeJet 854 Sprayer Control - Manual (Page 35)

www.teejet.com
30
854 Sprayer Control
Auto.Master.Off.-.Speed
The TeeJet 854 automatically shuts the boom
sections off at the programmed speed to eliminate
an operator function when slowing to stop or turn
around.
• Use PLUS or MINUS keys to adjust
speed value.
• Press the PROGRAM key to advance to
next step.
When the sprayer speed exceeds the established
Auto Master Off Speed, the boom sections turn back
on. Set this value to “0” to disable. This feature is
disabled when operating in Manual Mode.
Figure 4-43: Auto Master Off - Speed
MPH
SPd
0.0
MIM
Minimum.Pressure.Setting
Set the minimum pressure to which the sprayer
is allowed to regulate. It is possible that when
the sprayer slows down, the control system will
regulate the pressure so low that it falls below the
manufacturer’s recommended pressure for the spray
tip or reduces system flow to the point where the
flow meter stalls.
Set the pressure setting to the minimum
recommended pressure range for the spray tips
being used. (For example, if this is set to 15 psi/10
bar, the console, in automatic mode, does not
regulate pressure below 15 psi/10 bar.)
• Use the PLUS or MINUS keys to adjust
the minimum pressure value.
• Press the Program key to advance to the
next step.
NOTE: An audible alarm is activated when this
feature is enabled. It will provide a steady
beep, indicating Medium Priority.
Figure 4-44: Minimum Pressure Setting
re6 10
PrS
Maximum.Pressure.Setting
Set the maximum pressure to which the sprayer
is allowed to regulate. This will help ensure
that the spraying pressure does not exceed the
recommended pressure range of the spray tips
being used. This step can be used to help prevent
spraying applications that contribute to drift.
• Use the PLUS or MINUS keys to adjust
the maximum pressure value.
• Press the PROGRAM key to advance to the
next step.
NOTE: An audible alarm is activated when this
feature is enabled. It will provide a steady
beep, indicating Medium Priority.